BFE Rite-Hite Turret Stabilizer
Protect your Rite-Hite Turret motorized live sonar pole mount with the BFE Rite-Hite Turret Stabilizer.
Designed specifically for the Rite-Hite Turret, this stabilizer connects the Turret shaft to your trolling motor shaft to provide additional support while traveling, running in rough water, or trailering your boat.
Unlike a fixed support, the BFE stabilizer is designed to remain installed while allowing both the trolling motor shaft and Rite-Hite Turret shaft to rotate freely.
Available Trolling Motor Models
Choose the correct version for your trolling motor:
- Minn Kota Ultrex
- Minn Kota Ultrex QUEST
- Garmin Force / Force Pro
- Lowrance Ghost / Ghost X
Each version is designed around the trolling motor shaft and Rite-Hite Turret installation.
Features
- Designed specifically for the Rite-Hite Turret
- Supports the Turret shaft while running in rough water
- Helps protect the Turret while trailering and traveling
- Allows the trolling motor shaft to rotate freely
- Allows the Rite-Hite Turret shaft to rotate freely
- Designed to remain installed during normal operation
- Available for several popular trolling motors
- Rugged BFE construction
- Made in the USA
Protect Your Rite-Hite Turret
Motorized live sonar pole mounts place the transducer independently from the trolling motor, giving you the ability to use Spot-Lock while continuing to aim your forward-facing sonar.
That also leaves the Turret shaft exposed to movement while the boat is running through rough water or being transported.
The BFE Rite-Hite Turret Stabilizer adds support between the Turret and trolling motor shafts to help reduce unwanted movement and protect your investment.
Important Fitment Information
Please read before ordering.
- This stabilizer fits Rite-Hite Turret wired and wireless models ONLY.
- It will not fit other brands of live sonar pole mounts.
- If your Rite-Hite Turret was purchased prior to 2023, this stabilizer may not fit.
- Early-generation Rite-Hite Turrets used a thicker plastic mounting plate. The BFE stabilizer will NOT fit the older thick plastic mounting plate.
- Newer Rite-Hite Turrets use the thinner aluminum mounting plate.
- If you're unsure which version you have, contact BFE with a picture of your Turret before ordering.
These restrictions are important: Rite-Hite itself also specifies that the BFE stabilizer does not fit Turrets equipped with the older thicker Gen 1 plastic mounting bracket.
Installation Note
The stabilizer must be installed with the trolling motor deployed or partially deployed.
This removes flex from the trolling motor shaft and allows the trolling motor and Rite-Hite Turret shafts to properly align.
The trolling motor cannot be raised or lowered while the stabilizer is installed.
Not Sure Which Version You Need?
Select the stabilizer version that matches your trolling motor.
If you're unsure about compatibility, especially if you have an older Rite-Hite Turret, contact BassFishin Electronics with a picture of your Turret and trolling motor before ordering.
BFE specializes in forward-facing sonar installations, trolling motors and motorized live sonar pole mounting systems.
Made in the USA.
