BFE Mounts, Stabilizers, Neoprene, Swag, and More!!

BFE Neoprene covers, Ultrex and Ghost Mega 360 mounts, Transducer mounts, Shirts, Hats, and much more!

$299.99

Tired of your arrow lagging and struggling to line up your live sonar for that perfect cast?? We have come up with a simple fix to replace the top cap and arrow on your Ghost trolling motor. This t...

BFE Lowrance Trolling Motor Mount Totalscan Active Imaging HD 3 in 1 2 in 1 LSS 2

$99.99

Lowrance Transducer Trolling Motor Mount. This mount works with 80 pound trolling motors and larger on the following models: ***DOES NOT FIT ULTREX QUEST This mount works with a Active Imaging H...

13% Off

BFE Humminbird Mega 360 Ultrex Quest Mounting Bracket

$174.99

~~$199.99~~

This includes the flat plate and hardware to mount to a Ultrex Quest. This will work with the original Ultrex and the new Ultrex Quest. ***This does NOT include the knuckle. You are able to use yo...

BFE Stabilizer for Rite Hite Turret and Minn Kota Ultrex

$164.99

You asked and we answered! Here is the all new BFE stabilizer that is designed to stay on your Minn Kota Ultrex and Rite Hite Turret. This allows both shafts to spin freely and prevent your Turret ...

BFE Jackplate Mount (Starboard) Lowrance Totalscan LSS 2 Active Imaging HD 3 in 1 2 in 1 3D

$179.99

This is designed to mount your transducer on the starboard side of your jackplate and prevent drilling unnecessary holes in the transom of your boat. The bracket has a pivot point to allow simple ...

BFE Minn Kota Ultrex Mega 360 Stabilizer / Support Bracket

$134.99

***PLEASE CAREFULLY READ THE NOTES BELOW PRIOR TO ORDERING: Do you have this bracket and the original Ultrex trolling motor? If so, this is the correct stabilizer. If you have a Ultrex Quest or ...

$174.99

This is a Coast Guard Certified LED light that replaces your normal anchor light. Made from aluminum and anodized black. This is a rock solid option that installs in less than 20 minutes! No more d...

$174.99

$324.99

Introducing the all new BFE Lowrance Ghost Mega 360 mount. This is a 3 piece mount made from Black Anodized Aluminum that will give your 360 a rock solid mounting option to a Lowrance Ghost trollin...

$99.99

Introducing the all new BFE Garmin Force Mega 360 mount. This is an aluminum anodized adapter plate made to work with the Ultrex model Mega 360. The Ultrex model is the perfect length for a 50" or ...

BFE Garmin Livescope Plus LVS34 Aluminum Replacement Knob

from $22.99

Tired of your factory plastic knob cracking?? Purchase the BFE replacement knobs made from aluminum and powder coated black. Includes a rubber washer. This is the last knob you will ever need for y...

BFE Adjustable Stabilizer for Pole Mounts

$194.99

~~$194.99~~

This stabilizer is an adjustable stabilizer made in 2 different lengths to fit a wide variety of pole mounts on the market. These are extremely rugged and will not move in rough water. We offer the...

BFE Stabilizer for Rite Hite Turret and Garmin Force

$164.99

***This fits a Rite Hite Turret ONLY. This will not fit any other pole mount. There is a 20% restocking fee if you return the stabilizer because it does not fit a different brand/homemade pole moun...

Sold Out

BFE Neoprene Lowrance Active Target / Active Target 2 Travel Cover

$24.99

This easy to use neoprene covers offer an inexpensive way to protect your Active Target transducer while traveling. The cover is designed to work with the transducer on either side of the trolling ...

28% Off

BFE Garmin GT52 / GT54 / GT56 Transducer Jackplate Mount

$89.99

~~$124.99~~

This is a jackplate bracket designed for a Garmin GT52, GT54, or GT56 transducer. These will also fit a GT34 and GT36. This allows you to mount the transducer to the jackplate without drilling hole...

BFE Stabilizer for Rite Hite Turret and Lowrance Ghost

$164.99

You asked and we answered! Here is the all new BFE stabilizer that is designed to stay on your Lowrance Ghost and Rite Hite Turret. This allows both shafts to spin freely and prevent your Turret fr...

$34.99

This is designed to keep the cables running up the shaft of your trolling motor from getting pinched in the mount. Includes hardware. ***This will ONLY fit a regular Ultrex. We make a different ver...

$34.99

This is designed to keep the cables running up the shaft of your trolling motor from getting pinched in the mount. Includes hardware. ***If you're stacking this on top of a 360 plate or pole mount ...

Sold Out

BFE Ionic Single 12V Cranking Aluminum Battery Tray

$64.99

All Measurements are Inside tray measurements. Rachet Strap and screws (12x1) Included. Single Cranking Battery ( 12-5/8" x 6-5/8") Fits 1 Ionic 100ah or 125ah ***This does not fit a regular gro...

$39.99

This is a direct wire kit that includes the lugs, heat shrink, and TH Marine Hydra connectors to eliminate the plug on your trolling motor. This works with all brand motors. What's Included: -TH Ma...

$24.99

This is a machined plastic cover that will cover up to a 1 1/2” hole. This is designed to cover any holes used for your electronics or trolling motor cables. Hardware included. 2 3/4" x 2" x 3/4"

BFE DUAL Stack Angled Over Pedal Mount 6”

$299.99

~~$299.99~~

This is an over the trolling motor pedal mount designed to hold 2 units and can be adapted to a triple mount with our BFE Triple Bar. This mount is angled towards the bow to offer better clearance ...

$44.99

~~$44.99~~

These are made from brass with all stainless nuts and posts. Stamped with positive and negative symbols along with being color coded. Includes one for negative and one for positive. These work on ...

BFE Lowrance HDS Live USB and HDMI Plug Covers

$5.00

This includes 2 covers for the connectors on the back of your HDS 12 and 16 Live units. There is one cover for the HDMI port and one for the USB port. Lowrance doesn't offer a replacement part for ...

BFE Double Ionic 12V 50ah Trolling Motor Aluminum Battery Tray

$69.99

All Measurements are Inside tray measurements. Rachet Strap and screws (12x1) Included. Dual TM (13-9/16" x 8") Fits 2 Ionic 50ah Trolling motor battery.

BFE Dedicated Electronics Wiring Harness

from $329.99

Includes complete harness to provide direct power to the console and another direct run of power to the bow. What's Included: Direct Ancor 8 Gauge to Console Direct Ancor 8 Gauge to Bow BFE connec...

$29.99

We designed this 1/4" thick aluminum plate to prevent damage on the deck of your boat caused by your trolling motor bounce buster / stabilizer rod. Made from aluminum and anodized black. Includes 4...

$94.99

This is a heavy gauge aluminum spare prop holder designed to fit inside your compartment or bilge. The base is 6” x 6” and includes all stainless hardware. Made in the USA!

$324.99

Introducing the all new BFE Minn Kota Fortrex / Maxxum Mega 360 mount. This is a 3 piece mount made from Black Anodized Aluminum that will give your 360 a rock solid mounting option to a Minn Kota ...

BFE Single Ionic 12V 50ah Trolling Motor Aluminum Battery Tray

$54.99

All Measurements are Inside tray measurements. Ratchet Strap and screws (12x1) Included. Single TM (7"x 8") ***Fits the Ionic 12V 50ah battery ONLY.

BoatEFX Trolling Motor Pedal TRAX Foam Pad

$29.99

BoatEFX Pedal TRAX Add traction, cooling effect, and style to your trolling motor foot pedal. Select your trolling motor above. Compatible with: Lowrance Ghost MinnKota Ultrex Garmin Force Easy ...

$174.99

This is a top plate designed to hold 2 units and can retro fit to your current over the pedal mount. The top plate is 3/4” on the bottom and 1 3/4” on the top. Constructed in all 1/4” aluminum and ...

BFE Mounts, Stabilizers, Neoprene, Swag, and More!!

BassFishin Electronics

Shopping Cart

Location

BassFishin Electronics