FREE Shipping on All Orders Over $500. (Excludes Batteries)

Bass Boat Technologies Custom Mounts

Bass Boat Technologies Custom Mounts

Regular price from $75.00
Sale price from $75.00
Regular price $75.00
Unit price
per 
***Does NOT fit HDS Live or Pro Units.  Compatible with HDS Gen 2 Touch, Gen 3, Carbon, Elite Ti, and Ti2 ONLY. The "Warrior Series" Heavy Duty Gimbal Brackets were designed as a direct replacement...
Choose Options
Regular price from $75.00
Sale price from $75.00
Regular price $75.00
Unit price
per 
  ***These will only work with HDS Live and PRO units. The DO NOT fit any previous model Lowrance units. The "Warrior Series" Heavy Duty Gimbal Brackets were designed as a direct replacement for th...
Choose Options
Regular price $40.00
Sale price $40.00
Regular price
Unit price
per 
The BBT Antenna Puck Bracket is designed to mount underneath or on top of your current BBT, Single Riser, Dual Stack or Triple mount Bow mount. The bracket allows you to adjust the puck to a level ...
Regular price from $75.00
Sale price from $75.00
Regular price $75.00
Unit price
per 
The "Cheyenne Series" Heavy Duty Gimbal Brackets were designed as a direct replacement for the factory Humminbird gimbal bracket. These Brackets are made from 1/4" thick aircraft grade aluminum and...
Choose Options
Regular price from $85.00
Sale price from $85.00
Regular price $85.00
Unit price
per 
The "Cheyenne Series" Heavy Duty Gimbal Brackets were designed as a direct replacement for the factory Humminbird gimbal bracket. These Brackets are made from 1/4" thick aircraft grade aluminum and...
Choose Options
Regular price $175.00
Sale price $175.00
Regular price
Unit price
per 
These "Off-Set Right" Stack Tops are designed to shift both units to the right 2 inches allowing for better control of the Trolling Motor Cables, especilly the Garmin Force TM and Lowrance Ghost TM...
Regular price from $25.00
Sale price from $25.00
Regular price
Unit price
per 
These are Risers that can be added to your Bow Stack mounts to help get you Graphs screens even. # 1 Riser: 1-1/2" Tall - $25.00# 2 Riser: 2-1/2" Tall - $35.00# 3 Riser: 3-1/2" Tall - $45.00
Choose Options
Regular price from $75.00
Sale price from $75.00
Regular price $75.00
Unit price
per 
Garmin has many models and uses a large variety of gimbal bracket sizes. If your unit is not listed in the drop down box as available, then you can measure your current bracket by using the 2 Photo...
Choose Options
Regular price $35.00
Sale price $35.00
Regular price
Unit price
per 
This can be added to a Phoenix Elite or Skeeter FXR to raise the graphs
Regular price $349.99
Sale price $349.99
Regular price
Unit price
per 
DesignThis Dual stack mount was designed to get your units as low as possible utilizing the Dropped Bow deck area. The units are off-set to keep the units inside the gunnel as much as possible. The...
Regular price $320.00
Sale price $320.00
Regular price
Unit price
per 
This is the 6" model for a Bass Cat and the standard top plate. Offset plates are available upon request.
Regular price $35.00
Sale price $35.00
Regular price $35.00
Unit price
per 
This leveler is used on plates to raise up your graph and give the proper angle.
Regular price $320.00
Sale price $320.00
Regular price
Unit price
per 
This is the 4" model for a Bass Cat and the standard top plate. Offset plates are available upon request.
Regular price $35.00
Sale price $35.00
Regular price $35.00
Unit price
per 
This leveler is used on plates to raise up your graph and give the proper angle.
Regular price $35.00
Sale price $35.00
Regular price
Unit price
per 
This is ideal when you're tight on space and need to raise your BBT dual plate.
Regular price $35.00
Sale price $35.00
Regular price
Unit price
per 
This is ideal when you're tight on space and need to raise your BBT dual plate.
Regular price $30.00
Sale price $30.00
Regular price
Unit price
per 
These HDPE Plastic spacers are designed to put under Stack Tops and Single Sonars when you need them 1/2" Higher.
Regular price $39.99
Sale price $39.99
Regular price $39.99
Unit price
per 
These "Add-On" Big Water Plates are designed to be installed on top of the shelfs of a Dual Bow mount. These plates connect the top and bottom row shelfs to make your bow mount "Big Water Proof" an...
Choose Options
Regular price $25.00
Sale price $25.00
Regular price $25.00
Unit price
per 
This Bow mount Plate Extension is designed to give you added space to install 15" plus graphs. This is necessary if your units are too close together on a dual or triple bow mount.
Regular price from $75.00
Sale price from $75.00
Regular price
Unit price
per 
The "Cheyenne Series" Heavy Duty Gimbal Brackets were designed as a direct replacement for the factory Humminbird gimbal bracket. These Brackets are made from 1/4" thick aircraft grade aluminum and...
Choose Options
logo-paypal paypal