Fishfinder + Transducer Mounts

BFE Lowrance Trolling Motor Mount Totalscan Active Imaging HD 3 in 1 2 in 1 LSS 2

$99.99

Lowrance Transducer Trolling Motor Mount. This mount works with 80 pound trolling motors and larger on the following models: ***DOES NOT FIT ULTREX QUEST This mount works with a Active Imaging H...

BFE Jackplate Mount (Starboard) Lowrance Totalscan LSS 2 Active Imaging HD 3 in 1 2 in 1 3D

$179.99

This is designed to mount your transducer on the starboard side of your jackplate and prevent drilling unnecessary holes in the transom of your boat. The bracket has a pivot point to allow simple ...

BFE Garmin Livescope Plus LVS34 Aluminum Replacement Knob

from $22.99

Tired of your factory plastic knob cracking?? Purchase the BFE replacement knobs made from aluminum and powder coated black. Includes a rubber washer. This is the last knob you will ever need for y...

BFE Minn Kota Ultrex Mega 360 Stabilizer / Support Bracket

$134.99

***PLEASE CAREFULLY READ THE NOTES BELOW PRIOR TO ORDERING: Do you have this bracket and the original Ultrex trolling motor? If so, this is the correct stabilizer. If you have a Ultrex Quest or ...

$324.99

Introducing the all new BFE Lowrance Ghost Mega 360 mount. This is a 3 piece mount made from Black Anodized Aluminum that will give your 360 a rock solid mounting option to a Lowrance Ghost trollin...

$174.99

This is a Coast Guard Certified LED light that replaces your normal anchor light. Made from aluminum and anodized black. This is a rock solid option that installs in less than 20 minutes! No more d...

28% Off

BFE Garmin GT52 / GT54 / GT56 Transducer Jackplate Mount

$89.99

~~$124.99~~

This is a jackplate bracket designed for a Garmin GT52, GT54, or GT56 transducer. These will also fit a GT34 and GT36. This allows you to mount the transducer to the jackplate without drilling hole...

BFE Adjustable Stabilizer for Pole Mounts

$194.99

~~$194.99~~

This stabilizer is an adjustable stabilizer made in 2 different lengths to fit a wide variety of pole mounts on the market. These are extremely rugged and will not move in rough water. We offer the...

FO Dominator Garmin Livescope Plus LVS34 Trolling Motor Mount for Perspective, Forward, and Down

$169.99

~~$149.99~~

***This is designed to go on a trolling motor. We carry another mount if you're adding this to your pole mount. CONTENTS: TMA-LVS34-DOM-TM TMA-LVS34-008 FO-LINK-1375-1 Note: No stock h...

Sold Out

BFE Neoprene Lowrance Active Target / Active Target 2 Travel Cover

$24.99

This easy to use neoprene covers offer an inexpensive way to protect your Active Target transducer while traveling. The cover is designed to work with the transducer on either side of the trolling ...

$44.99

~~$44.99~~

These are made from brass with all stainless nuts and posts. Stamped with positive and negative symbols along with being color coded. Includes one for negative and one for positive. These work on ...

Lowrance Active Target / Active Target 2 0 Degree Pole Mount by FO

$54.99

~~$54.99~~

The Fish Obsessed 0 Degree Mount is designed to go on a pole mount and eliminate the angle seen in the factory mount. This mount allows you to use Forward or Down mode and makes it easier to track ...

$174.99

$29.99

We designed this 1/4" thick aluminum plate to prevent damage on the deck of your boat caused by your trolling motor bounce buster / stabilizer rod. Made from aluminum and anodized black. Includes 4...

$94.99

This is a heavy gauge aluminum spare prop holder designed to fit inside your compartment or bilge. The base is 6” x 6” and includes all stainless hardware. Made in the USA!

FO Dominator Lowrance Active Target / Active Target 2 Trolling Motor Mount for Scout, Forward, and Down

$174.99

~~$174.99~~

***This is designed to go on a trolling motor. We carry another mount if you're adding this to your pole mount. Dominator Lowrance Active Target Trolling Motor Mount by Fish Obsessed CONTENTS: ...

BBT HDS 12 Gen 2 / Gen 3 / Carbon / Elite Ti / Elite Ti2 Gimbal Bracket D205

$85.00

***Does NOT fit HDS Live or Pro Units. Compatible with HDS Gen 2 Touch, Gen 3, Carbon, Elite Ti, and Ti2 ONLY. The "Warrior Series" Heavy Duty Gimbal Brackets were designed as a direct replaceme...

BFE DUAL Stack Angled Over Pedal Mount 6”

$299.99

~~$299.99~~

This is an over the trolling motor pedal mount designed to hold 2 units and can be adapted to a triple mount with our BFE Triple Bar. This mount is angled towards the bow to offer better clearance ...

$324.99

Introducing the all new BFE Minn Kota Fortrex / Maxxum Mega 360 mount. This is a 3 piece mount made from Black Anodized Aluminum that will give your 360 a rock solid mounting option to a Minn Kota ...

$174.99

This is a top plate designed to hold 2 units and can retro fit to your current over the pedal mount. The top plate is 3/4” on the bottom and 1 3/4” on the top. Constructed in all 1/4” aluminum and ...

BBT HDS 9 Live / Pro Gimbal Bracket D204

$75.00

***These will only work with HDS Live and PRO units. The DO NOT fit any previous model Lowrance units. The "Warrior Series" Heavy Duty Gimbal Brackets were designed as a direct replacement for th...

BFE Humminbird MSI/MDI Jackplate Mount Starboard Side

$179.99

This is an aluminum jackplate mount designed to install your MDI or MSI transducer on your jackplate. This requires drilling 1/4” holes for most installations. All made in America. ***Works with G3...

BFE Minn Kota Ultrex / QUEST Mega 360 2 Stabilizer / Support Bracket

$134.99

***PLEASE CAREFULLY READ THE NOTES BELOW: Do you have one of these mounting plates, then this is the correct stabilizer? If you have a mounting plate with 4 holes where it attaches to the ultrex t...

BBT HDS 12 Live / Pro Gimbal Bracket D200

$85.00

***These will only work with HDS Live and PRO units. The DO NOT fit any previous model Lowrance units. The "Warrior Series" Heavy Duty Gimbal Brackets were designed as a direct replacement for th...

Balzout Black w/ Silver Knobs Lowrance/Garmin 9

from $195.00

This is a Round Base (same pattern and size as D style 2.25" Ram) with a 6" arm. This will work with Lowrance and Garmin units and will support up to a 16" Unit. Tired of constantly adjusting your ...

FO Dominator Ultrex Quest Garmin Livescope Plus LVS34 Trolling Motor Mount

$174.99

PART NUMBER: TMA-LVS34-DOM-QSTLNK-ZPKG Garmin 0 degree LVS34 Live Imaging mount for Minn Kota Ultrex Quest trolling motor CONTENTS: TMA-LVS34-DOM-QST TMA-LVS34-008 FO-LINK-QST-1 Note: ...

$99.99

Introducing the all new BFE Garmin Force Mega 360 mount. This is an aluminum anodized adapter plate made to work with the Ultrex model Mega 360. The Ultrex model is the perfect length for a 50" or ...

BFE Jackplate Mount (Port) Lowrance Totalscan LSS 2 Active Imaging HD 3 in 1 2 in 1 3D

$179.99

This is designed to mount your transducer on the Port side of your jackplate and prevent drilling unnecessary holes in the transom of your boat. The bracket has a pivot point to allow simple leveli...

BFE Power Pole / Raptor Hydraulic Hose Plates 2 Pk

$49.99

~~$49.99~~

These work with the rubber grommets that are provided with Power Poles and Raptors. These require drilling two 3/4” holes for each plate. This is for two plates and hardware. Made in the USA from m...

Shorty BBT HDS 12 Live / Pro Gimbal Bracket D201

$85.00

***These will only work with HDS Live and PRO units. The DO NOT fit any previous model Lowrance units. This is a SHORTY version made for the bow ONLY. The "Warrior Series" Heavy Duty Gimbal Brack...

Garmin Livescope Plus LVS34 0 Degree Pole Mount by FO

$44.95

PART NUMBER: TMA-LVS34-008 (MOUNT ONLY) PART NUMBER: TMA-LVS34-008HDDR (MOUNT WITH REPLACEMENT HDDR DOMINATOR AXLE ASSEMBLIES) CONTENTS: LVS34 transducer side clamp half Back side clamp ...

from $224.99

This is a wedge designed to level your trolling motor. This is critical on some model boats such as Vexus and Triton to get your Mega 360 or Live sonar parallel with the bottom of the lake. Sold in...

Fishfinder + Transducer Mounts

BassFishin Electronics

Shopping Cart

Location

BassFishin Electronics