{"title":"ShuttleSlide Mounts","description":null,"products":[{"product_id":"shuttleslide-ss-9-5rv2-rotating-trolling-motor-mount","title":"ShuttleSlide SS-9.5Rv2 Rotating Trolling Motor Mount","description":"\u003cp\u003eThis Patented mount is CNC Machined from\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1.0″ thick\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e6061-T6 aluminium. Additionally, it is Type III Hard Coat Anodized per\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.anodizing.org\/page\/military-spec-anodic-coatings\" rel=\"noopener\" target=\"_blank\"\u003eMIL-A-8625\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand comes with a lifetime warranty*.   New for 2026, the SS9.5Rv2 has been optimized for lower space requirements and easier fitment of shaft stabilizers.  This model rotates fully with 4 locking positions at 0, 30, 60 and 90 degrees to allow you to pivot or rotate the motor into position. Fully compatible with your\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMinn Kota, Garmin, Rhodan, Power-Pole, Motorguide\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor any other trolling motor with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to 120 inch\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eshaft length. If you want to use your standard quick release mount such as RTA-17, MKA-21, RTA-54, RTA-62, MKA-64, RTA-55, MKA-56, or Garmin versions, we have those hole patterns included already so you are all set!  Quest series motors require\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.shuttleslide.com\/catalogs\/p\/all\/shuttleslide-mount_brackets\/69af195a4610dfc644d3fa12\/qst-1\"\u003eQST-1\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eexpander plate so please add that to your cart when ordering for those motors.  With a built in, simple to use detent mechanism, simply pull the large pin and rotate the motor so the shaft clears the rub rail.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEasy! \u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe SS-9.5Rv2 is the most robust rotating mounting system available today.\u003c\/p\u003e\n\u003ch4\u003eWhy choose SS-9.5Rv2 over the SS-7.5Rv2? (Short Video)\u003c\/h4\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eYou want to reduce the amount of pressure on your deck (clear deck space required for a 9.5″ diameter circle)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy choose a rotating mount?\u003c\/h4\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eYou have limited space to attach a trolling motor\u003c\/li\u003e\n\u003cli\u003eYou want the trolling motor to sit off to the side and sit along the gunwale\u003c\/li\u003e\n\u003cli\u003eYou want a clear view of the bow without the trolling motor obstructing your field of view\u003c\/li\u003e\n\u003cli\u003eALL SS-9.5Rv2 mounts require 6 holes in your deck for proper attachment with first bolt within approximately 13 inches from edge of rub rail\u003c\/li\u003e\n\u003cli\u003eUses all 3\/8″ 316 Stainless hardware\u003c\/li\u003e\n\u003cli\u003eOptional Backing plate\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.shuttleslide.com\/catalogs\/p\/all\/shuttleslide-trolling_motor_mounting_brackets\/69af2882d00a13b5e3e3d318\/bkp-9-5r\"\u003eBKP-9.5R\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003erecommended if your have concerns about your deck\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct overview\u003c\/h4\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eDesigned to be used with the following mount systems or trolling motors with shaft lengths up to 120 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinn Kota (Quest series included**):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eInstinct, Ulterra, Terrova, Powerdrive, Riptide Ulterra, Riptide Terrova, Riptide Powerdrive, Riptide SP\/ST, PD\/HC Pontoon and DH40\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGarmin Force Kraken\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRhodan (all models)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower-Pole Move PV (Offshore model supported!)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotorGuide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eXi5 and Xi3\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLowrance\/Simrad Recon\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eRTA-17, MKA-21, RTA-54, RTA-62, MKA-64, RTA-55**, MKA-56** Quick Release mounts\u003c\/li\u003e\n\u003cli\u003eJM55007 (RTA-17 \/ MKA-21 clone) Quick Release mounts\u003c\/li\u003e\n\u003cli\u003eMany other brands that share the same bolt patterns as above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003ca href=\"https:\/\/media.vxt.production.ldv-svcs.live\/assets\/shuttleslide\/images\/pdf_files\/ShuttleSlide-PDF-SS_9_5R_Dimensions.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDimensions\u003c\/a\u003e\u003c\/h4\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eDeck Plate footprint: 9.5″ Diameter\u003c\/li\u003e\n\u003cli\u003eCenter of rotation: Approximately 3.5 inches behind rear of motor\u003c\/li\u003e\n\u003cli\u003eCenter of rotation to edge of trolling motor shaft: Approximately 17.25 to 18.25 inches\u003c\/li\u003e\n\u003cli\u003eRotation Pin: 4.5″ Diameter\u003c\/li\u003e\n\u003cli\u003eDetent Pin: 10mm Diameter (Over 6,000 lb shear rating)\u003c\/li\u003e\n\u003cli\u003eTravel: 360 degrees, 4 detents at 0, 30, 60 and 90\u003c\/li\u003e\n\u003cli\u003eTrolling motor mounted height: ~1.50 inches from mounting surface (Boat deck typically)\u003c\/li\u003e\n\u003cli\u003eBottom of rotating plate to deck: Approximately 0.675 inches\u003c\/li\u003e\n\u003cli\u003eRated motor weight (NOT thrust): 120 lbs\u003c\/li\u003e\n\u003cli\u003eRated shaft length: UP TO 120 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/media.vxt.production.ldv-svcs.live\/assets\/shuttleslide\/images\/pdf_files\/shuttleslide-instructions-pdf_7_5r_or_9_5r_rev-c.pdf\" rel=\"noopener\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(Preliminary!)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.shuttleslide.com\/warranty-information\"\u003e\u003cstrong\u003eWarranty: Lifetime*\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ShuttleSlide","offers":[{"title":"Default Title","offer_id":43692284084291,"sku":null,"price":849.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0082\/5524\/2287\/files\/ChatGPT_Image_Aug_19_2026_04_08_26_PM.png?v=1787170124"},{"product_id":"shuttleslide-qst-1-quest-adapter-plate","title":"ShuttleSlide QST-1 QUEST Adapter Plate","description":"\u003cul class=\"bullet\"\u003e\n\u003cli\u003e\n\u003ch4\u003eProduct Description\u003c\/h4\u003e\n\u003ch4\u003eTHIS PLATE IS INTENDED TO BE USED WITH QUEST\/INSTINCT MOTORS ONLY AND IS NOT FOR SALE SEPARATELY\u003c\/h4\u003e\n\u003cp\u003eHave a new Quest or Instinct? This mandatory plate is required to attach your motor to a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.shuttleslide.com\/catalogs\/p\/all\/shuttleslide-mount_brackets\/69ab1b8c3d1ea1224324427f\/ss-7-5r-rotating-mount\"\u003eSS-7.5R\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.shuttleslide.com\/catalogs\/p\/all\/shuttleslide-mount_brackets\/69ab290ce72279d61b902d4a\/ss-9-5r-rotating-mount\"\u003eSS-9.5R\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003emount and is also compatible with RTA-55 or MKA-56 quick release mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCNC machined from 0.50″ thick 6061-T6 aluminum\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnly Used for:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eQuest or Instinct trolling motors (NOT SOLD SEPARATELY)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"bullet\"\u003e\n\u003cli\u003eLength: 13.50″\u003c\/li\u003e\n\u003cli\u003eWidth: 9.375″\u003c\/li\u003e\n\u003cli\u003ePlate thickness: 0.50″\u003c\/li\u003e\n\u003cli\u003eMaterial: 6061-T6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ShuttleSlide","offers":[{"title":"Default Title","offer_id":43692311511107,"sku":null,"price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0082\/5524\/2287\/files\/qst-1_873is.jpg?v=1787170730"},{"product_id":"shuttleslide-bkp-9-5r-backer-plate","title":"ShuttleSlide BKP-9.5R Backer Plate","description":"\u003cul class=\"bullet\"\u003e\n\u003cli\u003e\n\u003ch4\u003eProduct Description\u003c\/h4\u003e\n\u003cp\u003eWorried that your deck could use some reinforcement when attaching your motor with our SS-9.5R or SS-7.5R (works with both)?  NO PROBLEM!  Just add this backing plate to your order and you’ll have a 0.25″ thick 6061-T6 plate to use on the underside of your deck that will already have the hole pattern in it to match our mounts.\u003c\/p\u003e\n\u003cp\u003eBacking Plate Dimensions:\u003c\/p\u003e\n\u003cp\u003e9.5D” x 0.25″Thick\u003c\/p\u003e\n\u003cp\u003eIncludes hole pattern SS-9.5R\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ShuttleSlide","offers":[{"title":"Default Title","offer_id":43692314132547,"sku":null,"price":64.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0082\/5524\/2287\/files\/bkp-9-5r-small_1nbqp.jpg?v=1787170830"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0082\/5524\/2287\/collections\/ChatGPT_Image_Aug_19_2026_04_08_26_PM.png?v=1787233993","url":"https:\/\/www.bassfishinelectronics.com\/collections\/shuttleslide-mounts.oembed","provider":"BassFishin Electronics, LLC","version":"1.0","type":"link"}